logo saim
logo saim
February 28, 2024
SAIM Marine at DUBAI International Boat Show 2024

Dubai International Boat Show -DIBS - has grown in size and popularity to become one of the world’s most prestigious boat shows in the Middle East. QS Seamaster and Waveless are the two brands, among those distributed by SAIM, exhibited at the DIBS 2024 within the Italian Pavilion with ITA-ICE . QS Seamaster bow and stern thrusters represent the most […]

Read More
January 22, 2024
BOOT 2024 - Düsseldorf

QS Seamaster bow and stern thrusters were on display in Düsseldorf: a complete range of electric DC, AC, brushless DC-AC, retractable and hydraulic thrusters from 30 to 1400 Kgf thrust, available both with analogic or digital connection systems, on/off or proportional commands. BOOT is one of the most prestigious boat shows in the world and […]

Read More
January 17, 2024
2024 - SAIM Marine technical trainings

New year, new courses: The first session of the 2024 SAIM Marine technical trainings on Sea Recovery and Waveless products has been completed. From January the 17th until February the 1st we were hosting Dealers and Specialists from our Technical Service Centers Network (CAT) throughout Italy. The courses covered the following topics: Sea Recovery training: […]

Read More
November 14, 2023
METSTRADE 2023: QS Seamaster on display in Amsterdam

METSTRADE is the world’s largest trade exhibition for equipment, materials and systems for the international leisure marine industry. It includes three dedicated areas of expertise: the SuperYacht Pavilion, the Marina & Yard Pavilion and the Construction Material Pavilion. RAI Convention Centre organises it in cooperation with ICOMIA (International Council of Marine Industry Associations). The event’s […]

Read More
October 26, 2023
Technical Training in SAIM Marine - New Season

We have once again organised SAIM Marine Technical Training at Buccinasco headquarters. From October the 26th until November the 23rd we hosted Dealers and Specialists from our Technical Service Centers Network (CAT) throughout Italy. The courses were managed by Service Engineer & Application Manager - Head of SAIM Marine Service Department Mr. Marco Pezzuolo, given […]

Read More
September 27, 2023
Monaco Yacht Show 2023

SAIM Marine was exhibiting at the Monaco Yacht Show 2023, from 27th to 30th September. The last Boat Show of September always brings together professionals from the great international yachting industry since 1991: shipyards, brokers, designers, accessory manufacturers, service companies. MYS is recognized among industry operators as the unmissable event of luxury yachting. SAIM Marine […]

Read More
September 21, 2023
SAIM Marine at Genoa International Boat Show 2023

SAIM Marine was present at the 63rd edition of the Genoa International Boat Show from 21 to 26 September 2023: six days dedicated to boating with exhibitors coming from all over the world, with the best proposals in the nautical sector and the latest innovations. Genoa International Boat Show 2023 has once again involved manufacturers […]

Read More
September 12, 2023
SAIM Marine at Cannes Yachting Festival 2023

SAIM Marine was present at YFC and this year there were many striking surprises and innovations. The Yachting Festival has been held every September since 1977, the first Show of the nautical season, the Yachting Festival is the most important in-water event in Europe and brings together the leading players in the yachting industry who […]

Read More
August 27, 2023
The range of DATA HIDROLIK windlasses debuts at the september Boat Shows at SAIM Marine exhibition area

SAIM Marine introduces the products of the well-known Turkish company Data Hidrolik for the first time at the forthcoming Boat Shows. Data Hidrolik has been manufacturing windlasses, mooring capstans and electric and hydraulic steering systems for a broad range of marine vessel since 1945. SAIM Marine was designated as the sole distributor of Data Hidrolik […]

Read More
August 27, 2023
Perfect visibility when navigating

For the first time at the Septembre Boat Shows, Saim Marine is introducing the range of wipers from Dutch manufacturer Exalto Wiper Technologies, a complete high-performance system. Exalto produces the world’s best professional marine wiper systems for all kind of vessels in the commercial and leisure sectors. The wipers are designed for use in all […]

Read More
June 19, 2023
SEAWORK in Southampton: QS Seamaster, Kohler and AnchorGuardian at Atlantis Marine Power booth

SEAWORK is Europe’s largest on-water commercial marine and workboat exhibition and it is the meeting place for the commercial marine and workboat sector. Atlantis Marine Power - a SAIM Group company and distributor for numerous world class manufacturers -displayed Kohler Marine Generators and QS Seamaster Thrusters. It was also pleased to introduce AnchorGuardian on the […]

Read More
June 14, 2023
SAIM Marine announces Agreement with Data Hidrolik

SAIM Marine has signed a distribution agreement with DATA Hidrolik, the well-renowned Turkish company which manufactures windlasses, mooring capstans and electric and hydraulic steering systems for all kind of marine vessels. The agreement started on June 1st. SAIM Marine will distribute DATA Hidrolik products in Italy, in UK and in the GCC (Gulf Cooperation Countries […]

Read More
May 30, 2023
World Première in the Southern Hemisphere

On the 25th of May QS Seamaster introduced its brand new thruster model QS 30-110 at the Sanctuary Cove International Boat Show. With a range of cutting-edge marine tech and equipment, power and sail vessels on display, it is the most important boating exhibition in the Southern hemisphere. QS Seamaster thrusters has been on show […]

Read More
May 1, 2023
SEAMLESS INTEGRATION

SAIM Marine introduces another solution by Zipwake. The Swedish company Zipwake has been revolutioning boating since the very beginning of its activity. The launch of the Zipwake Integrator Module marks a further important step in the field of interceptor systems and enables SAIM Marine, the Italian distributor, to provide its customers with yet another innovative […]

Read More
April 12, 2023
Technical training on KOHLER Marine products in Reggio Emilia

From April 12 to 14, SAIM Marine Service staff was in Reggio Emilia at KOHLER headquarters to attend training courses on generator sets, held by Mr. Paolo Zanti and Mr. Francesco Pitardi. The course "Kohler KDI Engines & Diagnostic tool, K-Series and J-Series generators, Installation, Service & Diagnostic, DEC3500, PGEN, Product Registration and Warranty Procedure," […]

Read More
March 14, 2023
SAIM Marine Technical Training

After a three-year online courses, we have once again organised SAIM Marine Technical Training at Buccinasco headquarters. From March the 13th until April the 6th we hosted Dealers and Specialists from our Technical Service Centers network (CAT) throughout Italy. The courses were managed by Service Engineer & Application Manager Mr. Marco Pezzuolo, given by Mr. […]

Read More
February 28, 2023
SAIM Marine at DIBS in Dubai

Dubai International Boat Show is the most established boat show in the UAE, GCC and Middle East. Whether you want to buy a boat, discover luxury yachts and superyachts, explore the latest diving and aquatic innovations, it’s the definitive event for luxury and lifestyle. QS Seamaster and Waveless are the two brands, among those distributed by SAIM, exhibited at […]

Read More
January 30, 2023
QS Seamaster at BOOT 2023 in Düsseldorf

SAIM Marine attended BOOT 2023 in Düsseldorf with QS Seamaster - bow and stern thrusters: a complete line of DC, AC, brushless DC-AC, retractable and hydraulic thrusters from 40 to 1400 Kgf thrust, available both with analogic or digital connection systems, on/off or proportional commands. BOOT is one of the most prestigious boat shows in […]

Read More
November 15, 2022
QS Seamaster thrusters debut at METSTRADE in Amsterdam

The METSTRADE is the world’s largest trade exhibition of marine equipment, materials and systems. An international B2B exhibition for the marine leisure industry. SAIM Marine attended the event together with Confindustria Nautica and with a collective of Italian companies, organized in collaboration with ICE Agency for the support and development of business and networking activities […]

Read More
November 10, 2022
SAIM Industrial at EIMA 2022

SAIM Industrial presented at EIMA in Bologna the new electrically controlled D1105-K diesel engine of the globally-renowned Japanese manufacturer KUBOTA. The new D1105-K industrial diesel engine enhances Kubota’s line-up of electronically-controlled engines below 19kW and incorporates the company’s unique TVCR combustion system. This new engine had its first presentation on the Kubota Engine booth at […]

Read More
October 13, 2022
SAIM Group acquires UK Kohler distributor

The UK-based Kohler distributor Atlantis Marine Power has been purchased by SAIM Group. The acquisition strengthens SAIM presence on international markets and give more opportunities to the distribution in the UK. Thanks to the acquisition SAIM and AMP will be the two most important Kohler distributors in Europe. Founded in 1986, Atlantis Marine Power (AMP) […]

Read More
September 28, 2022
Swiss Ocean Tech & SAIM Marine announce their strategic partnership today.

Swiss Ocean Tech (SOC), a start-up bringing safe anchoring to sailor, ship and sea and SAIM Marine announce their joint partnership today.  The partnership involves an investment to further develop the AnchorGuardian technology as well as assigning SAIM sole rights for distribution of the solution to the Italian market. With safety and sustainability playing an […]

Read More
September 28, 2022
Monaco Yacht Show 2022

SAIM Marine at the Monaco Yacht Show 2022. The last Boat Show of September has been bringing together professionals from the great international yachting industry since 1991: shipyards, brokers, designers, accessory manufacturers, service companies. It is recognized among industry operators as the unmissable event of luxury yachting. Our booth was located at Darse Sud - […]

Read More
September 21, 2022
SAIM Marine and INCOFIN at the Genoa International Boat Show 2022 from 22nd to 27th September

We attended, as usual, the 62nd Genoa Boat Show, an essential event for both the international yachting market and sea enthusiasts.  We had an important news at SAIM Marine booth: INCOFIN, a SAIM Group company leader in the motor filtration sector, exhibited its products together with us. Therefore, we have shown you a complete range […]

Read More
September 5, 2022
Cannes Yachting Festival 2022 - from 6 to 11 September

The Yachting Festival in Cannes has just ended. As the first show in the boating season, it is Europe’s leading in-water boating event and the major players in pleasure yachting came here to launch the show season by showcasing their new premiere. We would like to thank all our customers that came at our stand […]

Read More
September 5, 2022
SMM 2022: QS Seamaster in Hamburg

The SMM International Maritime Trade Fair in Hamburg is the largest maritime industry trade fair and considered the most important global maritime industry event. It gathers more than 2,200 companies from almost 70 countries, attracting more than 50,000 visitors from all over the world. It is the world-leading fair of the maritime economy. SAIM Marine and […]

Read More
June 23, 2022
QS Seamaster UK Premiere at Seawork

QS Seamaster debuted with its range of thrusters in the United Kingdom at Seawork, the leading European commercial marine exhibition in Southampton’s Mayflower Park, from June 21st to 23rd. The QS Seamaster range of thrusters has been designed according to the technical specifications of SAIM Marine, the marine Division of the Italian SAIM Group, a […]

Read More
June 23, 2022
SAIM Europe GmbH in Stuttgart for CastForge 2022

SAIM Europe GmbH attended for the first time CastForge in Stuttgart from 21st to 23rd June 2022.CastForge is the exhibition dedicated to the entire forging and casting supply chain and it is aimed at companies dealing with castings, materials (cast iron, steel, alloys, aluminum), forging, production and processing of cast and forged metals and engineering […]

Read More
April 5, 2022
SAIM Marine appointed as Hydromaster Sales Agent in Italy

SAIM Marine signed a sale agency agreement for the distribution of Hydromaster azimuth pods and thrusters in Italy. The Dutch company has 60 years of experience in reliable, durable advanced propulsion systems  and keeps on investing in innovative solutions to provide the latest technologies ever. The recently signed agreement means the introduction of cutting-edge azimuth […]

Read More
February 23, 2022
SAIM Marine attended the Dubai International Boat Show

Dubai International Boat Show is the premier and most established boat show in the UAE, GCC and Middle East. Whether you want to buy a boat, discover luxury yachts and superyachts, explore the latest diving and aquatic innovations, it’s the definitive event for luxury and lifestyle. QS Seamaster and Waveless are the two brands, among those distributed by SAIM, […]

Read More
November 30, 2021
IT 400-E NEW SERIES E INTERCEPTOR MODELS

Zipwake expands its series E of inteceptors with two new models. IT 400-E features a length of 400 mm for both straight and the chine version. Their blade rate and stroke are 40 mm/s and 60 mm respectively. This means plenty of lift force, outperforming conventional trim tabs’ control rate by a factor of 10. […]

Read More
October 22, 2021
EIMA: the 44th edition ends today

The 44th edition of Eima International in Bologna ends on Saturday 23rd October. A special thanks goes to the customers who came to the Exhibition and visit SAIM Industrial Booth, admiring the wide range of Kubota engines and the brand new elecronically controlled D902-K engine. Kubota offers solutions for all needs: diesel, petrol, CNG, LPG […]

Read More
October 21, 2021
SAIM Industrial introduces the new electronically controlled KUBOTA D902-K engine at EIMA in Bologna

In world preview SAIM Industrial presents at EIMA in Bologna the new electrically controlled D902-K diesel engine of the globally-renowned Japanese manufacturer KUBOTA. The new 3‐cylinder D902‐K (displacement 0.898L), which is set for mass production from 2022, is the first electronic CAN (Controller Area Network) controlled engine that Kubota has developed for output less than […]

Read More
September 22, 2021
SAIM Marine at Monaco Yacht Show

We had not yet left Genoa that we were already waiting for you in Monte Carlo - Darse Sud - Booth DS 31 SAIM Marine looks forward to seeing you next year!

Read More
September 18, 2021
Sold out for the second consecutive day at the Genoa Boat Show.

Access availability has in fact reached the maximum limit also for Sunday 19 September. There were many visitors, including entrepreneurs in the nautical sector, and even just lovers of the sea and navigation. We welcomed many guests ay our booth, thanks to everyone and we look forward to seeing you again next year!

Read More
September 7, 2021
Cannes Yachting Festival 2021

We were at the Yachting Festival in Cannes from the 7th until the 12th of September to show you our products and this year's latest news. Thanks a lot to our visitors and we look forward to seeing you next year! Vieux Port - Booth PAN 201

Read More
August 3, 2021
SAIM Group Convention 2021

Each year we choose a new theme and a new venue for the SAIM Group Annual Convention. This year we are also celebrating the 70th anniversary of SAIM founding and therefore, following the theme "Beauty will save the world", we wanted to celebrate the event in an extraordinary place: Villa Panza in Varese. We have […]

Read More
July 6, 2021
SAIM ANNOUNCES DISTRIBUTION AGREEMENT FOR WAVELESS

SAIM Group keeps on expanding the range of the products it represents. It has recently signed an agreement with CMC Marine for distributing the Waveless stabilization system in Italy, San Marino and the six Arabian Countries of the Gulf Cooperation Council (Saudi Arabia, Bahrain, United Arab Emirates, Kuwait, Oman and Qatar). The Waveless system of […]

Read More
June 23, 2021
SAIM celebrates 70 Years

The beginning of its 8th decade is an important goal for SAIM. SAIM started by opening a small office downtown in Milan. Today it is a large Group whose business is focused on marine, industrial and engineering. The Group, founded by Donato Donà in 1951 is currently managed by the family third generation, Donato’s grandchildren: […]

Read More
May 6, 2021
SAIM and INCOFIN become members of the Engine Union within Unacea.

Unacea is the Italian construction equipment association, founded in 2010, counting around 70 member companies and a rate of representativeness in terms of turnover of 80% of the Construction Equipment sector, both in producing and importing all types of equipment: earthmoving, road, concrete, drilling, attachment, and tower cranes. Beginning 2021, the association decided to establish […]

Read More
December 21, 2020
SAIM received the renewal of the official Certificate of Quality Management System

On November 13th SAIM received the renewal of the official Certificate of Quality Management System according to UNI EN ISO 9001:2015 standard. The Certificate issued by IMQ-CSQ certifies that the Quality System operated by SAIM is in compliance with the standard ISO 9001:2015 for the following activities: import, distribution, application and after-sales of mechanical, electro-mechanical, […]

Read More
November 16, 2020
SAIM provides Castoldi Waterjets with Zipwake interceptors

Castoldi Waterjets integrated with Zipwake interceptors for maximum efficiency and performance SAIM, Zipwake interceptor distributor in Italy, will deliver Zipwake Series E to Castoldi for their waterjets. Jet tender and waterjet expert Castoldi is no stranger to cutting edge technology.  Now thanks to SAIM it has entered into collaboration with the Swedish top interceptor manufacturer […]

Read More
October 21, 2020
The new SAIM Engine Test Bench

SAIM has always held great interest in fixing and testing engines, in fact, during the activities of the B.U. Industrial over the years, we already used test benches to verify repaired engines or new ones for specific required certification by the various approval authorities. The adoption of the Stage V emission reduction regulation has extended […]

Read More
October 6, 2020
Genoa Boat Show - day 5

An intense day this Monday for the Genoa Boat Show. The Saim Marine stand welcomed Service Dealers and customers from all over Italy who appreciated the numerous innovations and products previews on display as well as established products, such as Sea Recovery watermakers, Zipwake interceptors (with the new E range), Maxwell winches, ABT-Trac stabilizers and […]

Read More
October 5, 2020
Genoa Boat Show - day 4

The weather was mild for half a day at the Genoa Boat Show, giving the 10,000 attendees the opportunity to visit the docks and open-air booths at the Power Village before sheltering from the rain in the blue pavilion for the rainy afternoon. At the Saim Marine stand there were numerous visits and interest for […]

Read More
October 2, 2020
Genoa Boat Show - “Design Innovation Award”

The third day of the 60th Boat Show opened with the awarding of the “Design Innovation Award”, the new award established in this 60th edition by Confindustria Nautica and I Saloni Nautici. SAIM Marine was awarded the prize for the SeaDrive electric pod, a new line of high-tech products that SAIM will soon distribute on […]

Read More
October 1, 2020
Genoa Boat Show - day 2

Despite the non-stop rain, Genoa once again welcomed the visitors who came to the Boat Show yesterday. The greatest interest at the SAIM stand was directed to the new range of QS Seamaster thrusters, born from a technological and production partnership with Quick and developed according to SAIM Marine specifications.

Read More
September 30, 2020
Genoa Boat Show - day 1

The first day of the Genoa 2020 International Boat Show, the only international boat show of the Covid era in Europe, ended with an unexpected day of good weather. Although the Organization did not go too far in communicating numbers and data, it seems that the turnout of visitors has exceeded expectations, giving a pleasant […]

Read More
September 27, 2020
In Genoa we are almost ready!

Our booth is completed, only few details are missing. We look forward to seeing you on October the 1st for the Grand Opening!

Read More
September 17, 2020
We are ready for the Boat Show!

As usual we are waiting for you at the Genoa Boat Show, from the 1st to the 6th of October. We will welcome you at the Power Village - Booth PW03 We are waiting for all operators in the marine sector and all enthusiasts and lovers of the sea, we will surprise you with our […]

Read More
September 8, 2020
SAIM announces agreement with Quick Spa

SAIM Spa and Quick Spa have signed a deal to exclusively manufacture a new range of thrusters. The recently developed brand is named QS Seamaster and will be exclusively distributed by SAIM Marine. QS Seamaster – www.qs-seamaster.com – combines SAIM technical specifications with Quick advanced production technology. It takes advantage of SAIM 30-year experience in  […]

Read More
July 3, 2020
SAIM Marine appointed as Sea Recovery Sales Agent in the Arabian Gulf countries

SAIM Marine has recently reached an agreement with Parker Water Purification for the distribution of their products in the countries of the Arabian Gulf (UAE, Saudi Arabia, Bahrein, Kuwait, Oman). The agreement concerns Sea Recovery whose water makers are already distributed in Italy by SAIM Marine, HRO and Village Marine. Due to its long-standing experience […]

Read More
July 3, 2020
#offroadrecovery Massimo Donà’s point of view at Diesel magazine webinar

Massimo Donà, president of Unimot – Ascomac, participated as a speaker at the #offroadrecovery webinar that the magazine Diesel, together with Tractors and Shipyard Machines, had organized in May. During the event, DIESEL Director Fabio Butturi urged Massimo Donà on some hot issues: the impact of sanitization procedures for companies regarding the resumption of activities […]

Read More
July 3, 2020
Safe power delivery on board

Safe, simple and reliable. Smartplug® is the new industry standard, a revolutionary shore power system. SmartPlug® provides greater protection against loose connections and corrosion – the leading causes of shore power failure and fires. The secret is all in the construction qualities of the system. Pin contact area is increased by more than 20x and […]

Read More
April 17, 2020
DYNAMICA Gensets Technical Training

We started on Tuesday 21 January 2020 with the DYNAMICA Gensets course aimed at our client BOAT GYRO JAPAN Co. LTD. Training title: DYNAMICA MINI 40 SERIES “E”. Teachers: Marco Pezzuolo with the collaboration of the technician Mr. Alberto Santucci and Mr. Tim Krull. Italian-Japanese mediator interpreter Mr. TERAUCHI Haru. The course covered the following topics: Dynamica MINI E generators product presentation Dynamica generators technical course, installations and […]

Read More
April 17, 2020
SAIMGroup Convention 2020

The SAIM Group 2020 Convention took place at the Alfa Romeo Historical Museum in Arese on January 24th. This year, after introducing the results and future objectives, an interesting and fun quiz held by the well-known actor and trainer Fabrizio Fontana overwhelmed us with his humor and involved us in a team game. Also this year was […]

Read More
April 17, 2020
Technical Training Zipwake

From 4th until 7th February 2020 were held the following Technical Training for our CAT (Technical Assistance Centre): Training title: ZIPWAKE “S” Series and new “E” Series. Teachers: Mr. Mats Sköld (Zipwake Product Support Manager) with the collaboration of Mr. Marco Oltolina. The courses covered the following topics: * Commercial and functional presentation of the product. * Technical course on Zipwake S […]

Read More
April 17, 2020
SAIM takes part in CONNEXT 2020

Due to the epidemiological emergency from CODIV-19, Confindustria and Confindustria Servizi S.p.A. have suspended the organization of the Connext 2020 Event – the Industrial Partnership Meeting, scheduled for February 27th and 28th, 2020 in Milan, at the MiCo Milano Congressi.The decision was determined by the critical evolution of the health emergency in Northern Italy, in […]

Read More
December 10, 2019
New range of Zipwake Interceptors

Launched at the latest Mets, Zipwake Dynamic Trim Control System Series E is the natural evolution of the successful Series S that incorporates a state-of-the-art family of large durable, fast acting interceptors engineered for boats from 60 to 100 ft. Series E includes three straight, three tunnel and two chine models. Their blade rate and […]

Read More
November 14, 2019
Kubota Engine V3800 – WG3800 multi-fuel at Ecomondo

This year SAIM Industrial exhibited KUBOTA engine  V3800 and its multi-fuel development WG3800 at ECOMONDO in Rimini from 5th to 8th november. The KUBOTA V3800 industrial engines match high performance and technology with excellence in emission compliance. The Common Rail System (CRS) realizes NOx & PM reduction, efficient combustion, and better performance. Diesel Oxidation Catalyst […]

Read More
October 3, 2019
September Boat Shows

The Boat Shows in Cannes, Genoa and Monaco are over and we can say that the presentation of the new products distributed by SAIM Marine had been successful. Dynamica launched two new Models of the gen-set range. They are equipped with new Kubota engines, the new 70E and 90 E deliver 6 and 9 kW […]

Read More
July 30, 2019
SAIM Marine new products at the Boat Shows 2019

Underwater Lights Ltd. unveils its latest underwater lights Saim Marine launches two new by Underwater Lights, the British company which created underwater lights for the yachting market more than 25 years ago. QT75 e QT100 make their debut at the Cannes, Genova and Monaco Boat Show and expand QT Marlin range of surface mounted lights […]

Read More
June 21, 2019
Giorgio Ettore Donà “Boating Pioneer “

Santa Margherita Ligure, the 21st of June 2019 - The ceremony for the thirtieth edition of the Boating Pioneer Award took place yesterday . It is the recognition for Italian and foreign managers, craftsmen, designers and journalists who have made significant contributions to Italy's nautical heritage and boating industry history. Matteo Zaccagnino, Top Yacht Design Director, […]

Read More
April 16, 2019
Sea Recovery Technical Training

Sea Recovery Technical Training Courses for SAIM Marine Service Centers located throughout Italy and EMEA Parker Service Centers were also completed. The courses were coordinated by Parker Product Manager Paul Kamel. The training focused on the presentation of the new Controller and on the maintenance and troubleshooting of the new Aqua Matic watermakers and related […]

Read More
April 10, 2019
Singapore Yacht Show 2019

The Singapore Yacht Show has finished. Saim Marine and Mr. Cheng Hwee Ng - Amos Industries took part at the event  with the whole range of Dynamica gensets. Singapore Yacht Show has become the premier boat and yacht show in Asia, significantly contributing to the development of the fast-growing ASEAN maritime and luxury lifestyle markets […]

Read More
March 19, 2019
Kohler Technical Training

The KOHLER technical training sessions in SAIM’s headquarters addressed to the distributors network has just ended. The courses were run by KOHLER’s Service Manager Mr. Marco Pezzuolo with the support of SAIM’S Service staff together with the KOHLER Service Manager Mr. Francesco Pitardi and Service Supervisors Mr. Davide Ughetti et Mr. Paolo Zanti from Kohler […]

Read More
© Copyright 2020 Saim-group. All rights reserved.
contatti
log-in
CONTACTS
NETWORK
RESERVED AREA
envelopephone-handsetmap-marker linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram