Saim group
Saim group

CONTROL PANELS

From the simplest functions to a highly sophisticated system, Rehlko control panels offer solutions for every application. Each panel is adaptable to all requirements and is designed with safety and simplicity in mind to ensure easy and intuitive operation. The entire line of control panels features innovative communication functions for remote control operations, as well as state-of-the-art software that can be programmed for subsequent system upgrades.

General Features
• Designed for generators from 3 to 2800 kW
• Additional diagnostic functions available
• UL 508A certified
• Complies with NFPA 99 and NFPA 110 standard

ADC IId



• Integrated genset control and voltage regulation
• Output possibilities: SmartCraftTM V1.0, NMEA 2000, & SAEJ-1939
• Front USB input for software and diagnostic information upload and download
• NXP microprocessor with 512 Kb Flash and 60 Kb RAM
• Dimensions: 179 x 126 x 47 mm
• Programmed pre-heating for cold starts
• 12-character x 2-line display controlling: working hours; cycle status; generator
status; alarms; diagnostics setting parameters; maintenance warnings
(programmable)
Multifunction knob: controller configuration; V/Hz variation; etc.

SmartCraftTM is a registered trademark of Mercury Marine, a division of Brunswick Corporation

Digital Remote Gauge



The 3” digital remote panel shows information from the genset control panels, allowing them to be stopped, started and monitored.
The new 4.3” panel provides more comprehensive information and also allows parallel management.

DEC 3500 controller with integrated parallelling/Load Shedding option



• DEC 3500 control panel has the option of parallelling operation of two or more generators, even of different power ratings. The two generators can be up to 30 meters apart
• If set up for V-bias/S-bias input or for droop speed regulation, the DEC 3500 panel can interface in parallel with existing load distribution boards on the market, therefore providing shipyards more installation possibilities and making refitting even easier
• Sealed circuits and fittings protect the control panel from the worst marine environmental conditions
• Hardware and software are designed, built and guaranteed by Rehlko
• The generator connects via the integrated P-Gen connection to another generator
• The two gensets can be up to 30 meters apart
• 4.3 inch display with LED backlight and intuitive graphics
• Functions include bus detection, first-on logic and synchronization
• Key information detection: voltage, power, current, frequency
• Detection of key engine information: oil pressure, coolant temperature, fuel flow rate, fuel, sensing time, battery voltage
• Displays analogue inputs of alarms and faults
• Possibility of remote Start and Stop

© Copyright 2020 Saim-group. All rights reserved.
contatti
log-in
CONTACTS
NETWORK
RESERVED AREA
envelopephone-handsetmap-marker linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram